Add Warmth to Your Home With a Fireplace Wall Mount

Bring warmth and ambiance to your home, office or commercial space with a fireplace wall mount. These units are easy to install, and they have mounting brackets that can be used for hanging or recessing into a wall.

Follow the instructions on the site of the manufacturer to make a simple, quick installation. Make sure that the wall mounting bracket and the bottom of the fireplace are able to fit together, then fix it to the wall.

Size

A wall mounted electric fireplace can be a focal point in an area that provides warmth and ambiance. These fireplaces electric are available in various sizes that can be adjusted to suit any space. A smaller unit is ideal for bedrooms, while larger models could be placed in a living area or family room. Some models offer the option of recessed installation against the wall to create a seamless appearance.

The height of a fireplace wall mount can play a role in the way it appears in the room. Many people mount them higher up on the wall to create a dramatic effect. They are usually 6 to 12 inches above the floor. Some prefer to put them at the standard TV height of 4.5 to 5 feet which lets the fire be seen from all seating positions in the room.

No matter the size you choose, it is important to keep in mind certain aspects to ensure that your fireplace is safe and efficient. It is recommended to keep all combustibles at least three feet from the fireplace including furniture, drapes, and other things. If possible, you should also secure the mounting brackets to studs. If you cannot find studs, you must use anchors made of plastic to ensure that your fireplace won't be pulled loose.

Another important factor to consider when selecting the right fireplace wall mount is the amount of heat it generates. As a rule, choose a model which produces approximately the same amount as an ordinary electric heater. By following this rule of thumb you can be certain that your new fireplace will provide sufficient supplemental heating for the entire room.

Some fireplaces have distinctive features that set them apart from other fireplaces. Some fireplaces come with remote control operation with adjustable settings for brightness, and no-heat mode. They also have cool-to-the-touch glass and realistic-looking LED flames. Other noteworthy features include a built-in shelf to store electronics, and a simple installation process that doesn't require professional assistance.

Installation

Contrary to a built-in electric fire that requires hard-wiring into the electrical system of your home, fireplace wall mounts are semi-permanent. It can be installed straight onto a wall or a bracket that in turn is hung on the wall. It is important to choose the location close enough to an electrical outlet for the power cord to reach, while giving enough clearance to other objects, in accordance with the guidelines of the manufacturer in the owner's manual.

Before beginning the installation process, ensure that your fireplace is in good properly by plugging it in and playing with its LED lights and heat settings. This will let you know whether the fireplace is ready for installation or if additional testing is required.

Prepare the area in which you'll install your fireplace mount. Depending on the type of fireplace, you may require a bump-out in the wall. Or, you may prefer to cover the existing wall in drywall. In the latter case make sure you use the correct drywall techniques, such as mudding and taping, and allow it to completely dry before continuing.

After the walls have been prepared, attach the brackets to the wall with screws. It is recommended that they be fixed into the studs behind the drywall. This will stop the fireplace from being pulled away from the wall later on.

Once the bracket has been fixed, it's time to mount the fireplace. The style of fireplace will vary however, there will always be a ledge where the fireplace is placed and a spot to attach it to brackets on top. You can then put any additional media such as logs, embers or stones within the fireplace.

Some models allow you to attach the firebox and the screen together to the wall bracket. This can make installation easier however, you must make sure that everything is secured and is properly fitted prior to completing.

Once the fireplace is set, you can complete the design by screwing or tacking the bracket to the wall and trimming any wires that aren't needed. You could also think about using paintable wire covers to hide the power cord if you wish.

Safety

A fireplace wall mount is a great method of heating your home without occupying floor space. It is essential to take security precautions when using this kind of fireplace. To avoid electric shock the first step is to make sure that the fireplace is grounded. It is also important to follow the manufacturer's guidelines to ensure proper use.

It is possible to buy wall-mounted electric fireplaces that do not generate heat, however most of them come with a heater to enhance the authenticity of the flame effects. This is usually in the form of a fan-forced heater that blows air through a heating element but some models may include an infrared heater as well.

After the fireplace has been installed it is important to be cautious not to touch the hot surface as this can cause burns and damage the unit. To reduce the risk of fire keep combustibles no more than three feet away from the fireplace. Also, be sure not to block the vents at the back of the unit.

When selecting an electric wall-mounted fireplace, there are some additional safety features you must consider. For instance, you should be sure that the device has an emergency shut-off switch to prevent overheating and fires. It is also a good idea to choose a model that has a low output of heat as it will help you save energy.

Another factor to consider is the material that the surround is made of. You should select an option that is safe for children and pets like glass, steel or wood veneers. You should also choose one that has a display or remote control to make it easier to operate.

There are many types of wall-mounted fireplaces. These include electric and ethanol Fire. The one that is right for you will depend on your budget and the style of your home. No matter if you opt for an electric or ethanol fireplace, you can be sure that it will add warmth and elegance to your home. However, you should always adhere to the safety guidelines of the manufacturer and ensure that your family, friends and pets safe when using this fireplace.

Style

The style of the fireplace wall mount will determine the way it appears on your walls. Certain models are made to stand out, while others blend into the décor of the room. Modern models, such as the Streamlined electric wall fireplace has a sleek front face with a minimalist design. It has top venting to allow the air to circulate smoothly while maintaining the fireplace's stylish design. Its flat-mounted design and easy-to use remote make it easy to operate.

There are also wall mounted electric fireplaces with mantels that are more traditional. These units are perfect for homes that already have an open hearth or those who want to convert their fireplace that burns wood into an electric fireplace without chimney. These flat-wall fire places come in various sizes and come with an area to display your decorations. These fireplaces are great for bedrooms, living spaces and even home offices.

A gas wall-mount fireplace is a good option for those looking to add a cozy and inviting feel to their space. They come with a traditional log-set and are available in several frame styles such as natural stone and black. They also have a customizable ember bed and LED flame color options to give an individual touch. Some models come with a TV mount that is built-in to provide additional functionality.

Some models can be mounted directly on the wall, whereas others are designed to be partially or completely recessed into a wall. The Allusion wall-mount fireplace has a tiny footprint, which allows it to be recessed into frame walls of 2x6. However, you can add a trim skirt over the exposed area. The Allusion has a convenient remote and a variety of temperature settings, so you can enjoy the fireplace throughout the year.

Surface-mounted electric fireplaces generally project 4" to 6.5" into the room, which makes them easier to install than models that are built into the wall or constructed out of an existing wall cavity. They're also an excellent choice for renters who don't want to endure the hassle of drilling holes into their walls. When you move, you can easily remove or reposition your fireplace.