It might seem daunting to put up the flap for your cat, but with the right instructions, it's not too difficult. Firstly, determine how high you want the flap to be (on average the belly height). Note this on the door and use the template provided as a guideline to drill.

If you have a kitten that is still a baby then gently prop the door slightly open and encourage it to go through. Reward it when it goes through.

Take a measurement of the door

A cat flap is a wonderful option to allow your pet to move in and out of your home as it pleases. This can help with keeping your cat healthy by making sure that it is getting exercise and also being able to go back inside if stuck outside in bad weather, particularly in winter. It can also cut down on the amount of time you need to spend letting it in or out and will also help ensure your home is secure by allowing you to be aware of when it went out.

However, it is important that the flap for your cat is correctly fitted to prevent your pet from escaping through it or be pushed through by other animals (e.g. dogs). It is important to measure the height of your pet's belly and the entrance to your home so that you can ensure that the flap is at the right height. You can adjust the position of your flap in case your cat is taller or smaller than the average.

The next step is to utilize a spirit level mark the centre of the door that you will put the flap. Then, using the mark as a guideline, cut out the shape of the flap using the aid of a jigsaw. After cutting the area and sanded the edges to create smooth surfaces. Drill any holes you need to.

The installation of a cat flap installer near me flap should not take longer than two hours. The process is a bit more difficult if you have to install it in the form of a uPVC door or a composite one. This is due to the fact that these doors come in various thicknesses, which can affect the way the holes are cut. We recommend to consult with a professional when this is your first experience with glass.

Measure Your Cat

A fitting cat flap in upvc door panel flap can spare you from hours of listening to your pet meow to let it in or out. This is particularly useful if you are at work most of the day and your cat has to stay in the house waiting for you to get home in any weather.

It is essential to measure your cat first before you attempt the installation. Although it might seem like an easy task, it is essential to get the measurement right or your cat may be unable to use.

First, ensure that your cat is calm before you begin taking measurements. You will need to hold them in a way that they are not able to move, and ensure that the measuring tape or ruler is flat against their body and not bending in any place. Keeping the measuring tape or ruler against their body from the top of their head to the bottom of their tail will enable you to make an precise measurement.

Once you have the measurement of your cat's body, it's time to look at the door and decide where you want to place the flap. It is advisable to position the flap in the middle of your cat's belly because this will allow them to get through it without too much effort. This will also prevent the flap from making too much noise as it moves back and back.

You should also think about the thickness and the structure of the upvc door panel with cat flap door or composite. While all timber doors have the same thickness, uPVC or composite doors are different in their overall structure. This could make the process of the installation of a flap for your cat more difficult, as you need to ensure the hole is of the correct size.

You can also use the template included in the instructions to mark the position of the hole on the door. This will help you determine where the opening must be and also make sure the template is properly placed on the door. Using a spirit-level to ensure that the template is right against the door can be extremely helpful.

Cut the Flap

You'll need to cut an opening in the door to accommodate your cat flap before you can put it in place. This can be a challenging job and it is recommended that you seek out the assistance of a professional cat flap fitter for this step should you not have the skills or experience to complete the task yourself. You can also refer to the instructions provided in the kit to find out how to do it properly.

To do this, you have to determine the height of your cat's or kitten's belly and use that as an indicator point. As a rule of thumb put the flap around 10-15 centimeters higher than the ground. This is the typical height of the Cat flap in upvc Door cost's belly. This will allow your cat to pass through the flap easily and make it difficult for other cats or nosy neighbors to get in or out.

Once you have determined the location where the cat flap double glazing flap needs to be placed, mark this position on the door with the help of a pencil. Then, if your kit includes a template for paper, place it over the door and use the markings to drill holes into each corner of the template. You will then be able cut out the design of the template and replace it with your cat flap.

If you are installing your cat flap on a door made from wood or uPVC, you can do it yourself if you feel confident enough to handle the Jigsaw. Ensure that you do not cut through any of the door mullions or vertical rails. You can use a jigsaw cut the panel into a circle or square according to the design of your cat flap. Take your time and don't try to force the jigsaw into cutting faster.

Once the hole is cut and the flap is firmly positioned, carefully place the flap of cat food into its new home and make sure that it's securely fixed. If the flap has screws then push them into the protruding bolts. Once the screws are in place, you can sand any rough edges of the cut and then apply sealant around any gaps to ensure there aren't any draughts getting into your home.

Place the Flap

If you have an ordinary cat flap, you can try to encourage your pet to go through it by placing a small amount of cat food on the outside of the door. You can also try pushing the cat using sticks or your hand. Once your cat is accustomed to walking through the flap, it is likely to be able into and out as it wishes so you can let it out or in without having to be there holding the door open for it throughout the day (and possibly in any weather).

You can install an animal flap inside the UPVC or glass doors but it's not quite as straightforward as fitting a cat flap one into a timber external door because the UPVC doors and some glass doors don't have the same thickness. This could affect the way you cut the opening for the flap and could affect the way your flap will fit properly once it's been put in place.

The mounting kit could include a template that shows you the best places to drill holes. If the kit does not include a template, you are able to make one on your own. It's important not to press the jigsaw too hard when cutting, so it doesn't make a larger than needed hole in your door.

The majority of cat flaps are rectangular or square in shape, but there are some that are circular and these are usually more difficult to fit. If you have a circular flap, make sure that the hole is located in the correct place on the door. Otherwise, the cat might not be able to access it, and could be outside all day (or night).

Certain cat flaps have locks that allow you to control the time your cat enters and leaves. These are useful when your cat is scared of leaving in the dark, or coming back inside at night. They can also be helpful if you work all day. The lock can be engaged to allow entry or exit, and some locks can be locked in both directions, allowing you to shut the door completely. This is particularly beneficial for sick or elderly cats who aren't willing to go out in rainy weather.