How to Choose uPVC Replacement Window Handles

It is simple to replace a broken window handle made of upvc by an entirely new one. The first step is to remove the screws (typically pozidrive screws) from the base of your handle.

The handle that was used previously should be taken off and replaced with a brand new one. This will make your home more secure and allow you to access your windows from outside.

Espag handles

Espag handles are the most common handle style used on uPVC windows (although they're also found on timber and aluminium windows too). They operate a multi-point locking mechanism that locks the window after it's closed. The handle operates by turning a spindle that is extending from the back of the handle and locks into a gearbox inside the window. This moves a series locks around the perimeter of the window to open it. Espag handles come in a variety of spindle sizes - as little as 10 mm, or up to 55 mm. It is essential that you choose the right spindle size that is appropriate for your window.

Unlike traditional cockspur handles, with an offset lever design which requires more hand space to operate, espag window handles are available in left-handed or right-handed designs based on your preference and the orientation of the window. Many of our espag tighten window handle handles are able to be secured using a Secure by Design specification or key-locked to provide extra security.

The handle that is espagnolette is a fantastic alternative for those who prefer a more modern look. It's also simple to install. It is simply necessary to take off the handle you have previously installed and remove the cover for the screw (typically pozidrive bolts) before replacing window handles it with a new one. This is a straightforward process and will improve the performance of your uPVC windows.

It may be time to replace the handles on your uPVC tilt-and-turn windows, if they are becoming difficult to use. Fortunately, the majority of the handle mechanisms follow industry standards and therefore finding a suitable replacement shouldn't be difficult. You'll need the type of handle and the step height of the current handle. This information can be obtained from your uPVC contractor. This will assist you in making the most informed purchase possible and ensure that your uPVC replacement window handles will fit properly when they are installed.

Tilt and turn handles

Tilt and turn windows are a popular choice for homeowners who need the best ventilation and simple exterior window access. These windows open upwards using side hinges similar to casement windows, however they tilt inward at 90 degrees for air flow and cleaning. They are available in uPVC, aluminium and composite frames, however uPVC is the most affordable alternative and has lower maintenance requirements than aluminum or timber.

A tilt and turn handle is similar to an Espag handle however, it can also operate an incline-before-turn mechanism. The handles are equipped with a 7mm square spindle that extends out into the window frame and is then tucked into the gearbox for the tilt before turn mechanism. These handles can also rotate the window 360 degrees. The standard Espag handles are not capable of this.

The handle has detents in 90-degree positions, to ensure that you can't move it further than the point at which it can be turned. This is for security and safety purposes to lock the window into place. These handles also have key deadlocking for added security and they are insurance rated.

They are heavy-duty, die-cast handles designed specifically for tilt-and-turn windows. They are available in various finishes, including white and black as well as chrome and gold as well as brushed satin.

A large, modern handle that locks both tilt and turn window handle loose and turn positions, it's a draught excluder that stops cold air from entering your home when the window is closed. This handle is shaped like an angled lever, making it easier to grip. It also gives more leverage when opening the window. The handle comes in a variety of finishes that will suit any style of home, including antique brass and black.

Cadenza handles

Cadenza handles are a distinctive espagnolette handle design that was developed specifically for slim Aluminium fix window handle profiles. They have a sturdy grip designed for residential as well as commercial applications. The slide bar is controlled by a self-contained gearing mechanism inside the handle. The slide bar is connected with drive pins in an locking rod that is a espagnolette to secure the window. The Cadenza handle is locked by an unlocked key that stops the window from opening.

This handle is suitable for either Left or Right handed situations. It is equipped with a 48mm spade length. You will also need to select a lock that is compatible for your window. To identify whether your window is left or right handed, first, check the position of the long portion of the lever. If it is pointing left and you require an appropriate window handle for your left hand. If it is pointed right and you require a handle for the right hand.

The straight version of the Cadenza window handle with an bent blade (W62) can be confused with the angled Cadenza handle, however they are completely different. The angle of the Cadenza window handle (W62) requires an angled locking system to work properly. The straight handle can't be used with an angled locking system since it can cause the blade component to fracture.

The straight version is distinguished by a metal bar protruding from the base. This is the angled version. The angle of the Cadenza handle is the most popular of handles and has been in use for many years, however it has seen a decrease in sales since the espag lock and espagnolette handle have replaced it in new double-glazing.

Installation

Changing upvc windows handles is a straightforward process that requires only a screwdriver and patience. To ensure that the new handle is properly fitted, it is important to determine the type of handle and determine the spindle size. Taking these steps will ensure that the new handles made of upvc are safe and secure.

Choosing the correct handle can increase your home's security and reduce drafts. It can also save energy. It is essential to choose an easy-to-use handle that is simple to close and open, and lock in place when required. A good window handle can also improve the look of your home.

The first step to replace the uPVC handle is to take off the old one and replace it with a new one. To accomplish this, locate the screw caps on either side of the handle, and then remove the screws. Once you've removed the screws, take off the cover cap that is placed on top of the handle. The first screw will be visible. Take it off using an screwdriver.

If you are installing a cockspur handle be sure to measure the spindle length. It is essential to measure the spindle length of the handle since it must be at least 55mm long to fit inside the uPVC frame. If the spindle of the handle is too small the handle will not be able to engage the lock mechanism to open the window.

Test the handle to be sure it works. Make sure you switch the handle to the locked position and then back again a few times. Install the new handle after that and enjoy better security for your home.

Whether you're seeking to replace your old uPVC handle or add a new look to your uPVC windows, there are many options to choose from. It's important to choose the right handle for your budget and needs. The handle you select for your uPVC window should be durable and robust, with features that match your home's interior décor. For example the tilt and turn window requires a different handle than a standard uPVC handle since it allows the window to be opened in both directions.