Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your prized property from theft. This system is discrete and does not require any additional key fobs to operate.

The device makes use of the buttons in your vehicle (steering wheel doors, door panels, and the centre console) to create a unique pin code sequence of up to 20 presses. This will then allow the startup of your vehicle.

Simple PIN code Change Process

With the growing rate of vehicle thefts, many owners are looking to improve their security. There are a variety of security gadgets that are sold aftermarket, from tracking systems to alarms and immobilisers. However they do not all are equally efficient in protecting your vehicle. A tracking system can help you locate your vehicle if it's stolen, but it will not prevent the crime. Immobilisers, on the contrary perform exactly as they say on the label - they disable your car's motor to prevent it from being started. The Autowatch porsche 911 ghost installer is one of the most sophisticated options available, making it almost impossible for thieves to steal your car.

The ghost device uses the buttons on your car to create a unique sequence which must be entered to allow the engine to start. This can be accomplished by using the window, heater or indicator stalk buttons. Additionally it is possible to use an app for mobile devices that acts as an emergency PIN code override and allows the driver to operate the car without the button sequence. This feature is particularly useful when you need to surrender your car for valet parking or servicing since the immobiliser will still be activated and not disabled.

The Ghost is a very unique and ingenious device that is used in conjunction with the buttons on your vehicle rather than as a separate unit. It's not just an effective deterrent to vehicle theft and vandalism, but it can also be used on any future vehicles you may own. This makes it a more cost of ghost immobiliser-effective option than a traditional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser is a sophisticated security system that protects your vehicle from key cloning, hacking and ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be placed in the vehicle without the need for additional wiring and has been thoroughly tested to make sure it works with all vehicles. It also is resistant to jamming devices, which are a common technique used by thieves to bypass immobilisers.

The benefit of using CAN data is that it operates in a silent manner in comparison to conventional systems. It can't be detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by conventional diagnostic tools. The Autowatch Ghost Immobiliser Problems doesn't produce LEDs, but instead utilizes the buttons inside your vehicle, such as the steering wheel, centre console or door panels to create a unique, customizable disarm sequence. You can create a sequence that is as long as 20 presses to increase security. The iPhone app only allows one connection, using an individual pairing code for the Ghost. All communication between the two devices is encrypted.

The Ghost will stop car thieves from putting in an ignition key replacement or replacing the ECU to bypass the immobiliser. The engine can only be started only if a valid PIN is entered. It can be temporarily operated in the Valet/Service mode (with parameters set, such as a 30mph speed limit) which means you can hand your car to valet or service without having to enter an entry code.

Tested for each vehicle

The Autowatch Ghost is a world-first aftermarket CANbus immobiliser. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device detects signals to prevent your car from starting normally until you enter a specific code. The system can be turned on and off by using your smartphone's application without the need for wires.

The standard factory immobilisers work by using a transponder, which is embedded in the key. This transmits a signal to the ECU. The car will start if the correct code is sent. However, if the transponder from a different vehicle is used instead, the immobiliser doesn't recognize it. This makes it possible for the vehicle to be started and stolen. A South African company that is at the forefront of car security systems technology developed the ghost 11 immobiliser immobiliser. It shields you from hacking or key cloning, and even key theft. The only way thieves could take your car is by physically towing it away and even then they wouldn't be capable of driving it.

Ghost utilizes the buttons of your vehicle including the indicator stalk, steering wheel and door panels to create an unique, changeable PIN code sequence that needs to be entered before you are able to use your car. This is performed without the need for additional hardware, such as a key-fob and can be as long as 20 presses long. It is also undetectable by devices for diagnosis and transmits radio frequency signals, which means thieves cannot use sophisticated RF scanners or code-grabbing techniques to determine if an installation has been made.

Contrary to physical anti-theft devices such as wheel locks or clamps, Ghost is covertly integrated into the vehicle to ensure that it can't be taken away or disabled by thieves and is even more difficult to get rid of than a car alarm that requires disarming via the use of a button sequence. This makes it a perfect complement to a GPS tracker, which can help locate your car after it has been taken.

Override of emergency PIN code

You do not have to look too far on social media to find stories or even videos of vehicles that have been stolen by thieves using the latest technology tools available to them. This includes key-cloning and hacking tools that allow them to start your vehicle without the original keys.

The Ghost immobiliser helps combat this and provides you with an additional layer of security to prevent your vehicle from being stolen if it is targeted by thieves. It is created by creating an individual pin code sequence that is triggered by the buttons you have on the steering wheel, door panel and the center console. This unique PIN has to be entered along with your original key fob to stop the vehicle from getting started. The unique override pin is located on a black card which you will receive following the installation. It is simple to remember since there aren't any LED indicators.

The device is hidden inside the vehicle's wires and doesn't emit any radio signals, so it isn't able to be recognized by criminals using diagnostic software that is able to recognise what type of security system you have installed. This makes it a great alternative to the tracker.

In contrast to other security systems that use a relay inside the engine bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependant). This allows them to disable the vehicle completely with a digital block of commands that is sent to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems but this must be specified before installing the device. They also work with valet and service modes, and are a great alternative to a tracking device when you bring your vehicle to the dealer for an electrical problem.

Service/Valet mode

In recent years there has been a rise in the number of vehicles being stolen from owners without keys. It is easier than ever before to take your joy and pride due to the availability of key cloning devices and door lock picks. To combat this we now offer the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been cloned or your vehicle has been stolen.

It communicates directly to your car's ECU (Engine Control Unit) via the CAN data circuit. It's completely silent as it does not use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also stops the user from using an ECU or key to bypass the system, as only the PIN code allows the engine to be started.

The device is hidden within your vehicle and is accessed by existing buttons on your steering wheel, the centre console, and door panels. A unique & changeable PIN code sequence of up to 20 digits must be entered before you can start your vehicle.

This is the first aftermarket CAN-bus immobiliser for the market that has been designed. It can prevent your vehicle from being started or driven if you don't enter a PIN number first. If the device is activated and you attempt to drive away, it will display a warning on your dash which will flash on a regular basis for approximately 300m. If you type in your PIN code at this point, it will disarm the anti-hijack device and your car will continue to drive just as normal. If you do not enter your PIN at this point, the warning will continue to flash and will require a new PIN code for every attempt to start your vehicle.